The cast urethane molding process has been around for years. In addition to rapid prototyping, urethane molding can serve as a bridge for injection molding, as well as a low volume molding option when injection molding is cost prohibitive.
Cast urethane parts are strong and have similar properties to that of thermo plastics. These parts can capture remarkable details due to the flexibility of silicone tooling. Additionally, they have the look and feel of an injection molded part and can be crafted from several material options, including both rigid and flexible durometers.
Cast urethane tooling has a limited life, but generally yields from one to 25 parts. Tools can then be refurbished at a cost less than the original tool, and multiple molds can be utilized where volumes and speed are needed. The typical lead-time from start to finish is one to three weeks depending on the requirements.
There are many cast urethane options to consider, such as materials, color, texture, inserts and over-molding.
Wall thickness – Minimum wall thickness for parts should be no less than .050” with the maximum being .187’. Of course, these are not hard rules and variations are acceptable. Uniform wall thickness is preferred, but variations can be processed without impacting part results.
Drafts – The process for this option is very flexible and engineering-friendly. Unlike injection molded parts, the cast urethane process doesn’t require a draft, which saves valuable design time.
Undercuts – This option is not a concern and can be accommodated for within the cast urethane tooling process.
Ribs – The general rule of thumb is that ribs should not exceed 60% of the nominal thickness. This will help prevent sink effects in the part.
Bosses – These can be easily molded in to accommodate molding in fasteners or inserts.
EMI/RFI shielding – Enclosures designed to house electrical components may require EMI or RFI shielding. PDS offers both processes with copper shielding methods.
The cast urethane process is an inexpensive and accurate way to produce parts. Additionally, it can accommodate short lead times and create a variety of low volume production parts.
If time or money is a concern, urethane molding is an excellent alternative to steel tooling. Overall, cast urethane molding is a practical process to produce high-quality prototypes in a fast and efficient manner. Contact PDS today to learn more.